2
8’ x 8’ Square Party Lounger
Step 1 Connector Plate Attachment – 8’ x 8’ Party Lounger
Align (1) 4’ x 8’ Party Lounger Sectional Frame to be assembled
at
or near
the desired location of your completed 8’ Square Party
Lounger.
Install (4) Connector Plates to the assembly holes in the lower
side bracing of the Sectional using (4) ¼-20 x 7/8” Hex Head Bolts
fitted with (4) ¼” Locking Washers and (4) ¼” Flat Washers. Hand
tighten Hex Head Bolts with the Connector Plates positioned to
accept the second 4’ x 8” Party Lounger Sectional.
Note:
Do not tighten the Hex Head Bolts until instructed to do so
in
Step 2
.
Install the remaining (4) Connector Plates to the assembly holes in
the upper side bracing of the Sectional using (4) ¼-20 x 7/8” Hex
Head Bolts fitted with (4) ¼” Locking Washers and (4) ¼” Flat
Washers. Hand tighten Hex Head Bolts with the Connector Plates
positioned to accept the second 4’ x 8” Party Lounger Sectional
Frame.
Install Upper Connector Plates
Install Lower Connector Plates
7
Step 3 Headrest Cushion Attachment (Optional) 4’ x 8’
Align your Headrest Cushion (Optional) at the desired end of your
4’ x 8’ Party Lounger on top of the Cushion. Wrap the Velcro
Straps around the side Cushion and underneath the Seating Grid
of the 4’ x 8’ Party Lounger Frame, both sides. See below
illustration.
Engage the Velcro Straps at the center and underside of the
Seating Grid of your 4’ x 8’ Party Lounger.
Headrest Cushion (Optional)
4’ x 8’ Party Lounger with (Optional) Headrest Cushion
