background image

3

www.trophy.com.ua

Trophy TA-1001HD      User Manual

Device Operation

Safety Requirements

DVB-S/S2 HDTV Set Top Box design complies with international safety standards. However, 

operation with any electric appliances requires caution. We recommend you to ask a qualified 

master  to  install  the  device.  If  you  choose  to  install  it  yourself,  please  read  this  Operation 

Manual carefully. Pay special attention to safety requirements below.

Supply Voltage

Power supply must be AC 180 V…250 V, 50/60 Hz. Make sure your power supply complies with 

these requirements.

Overload

Avoid overloading the supply network by extension cords or adapters. It may cause fire or give 

you an electric shock.

Liquid Substances

Store liquid substances away from the device and make sure no such substances get inside 

the Set Top Box.

Foreign Objects

Please  keep  coins  and  other  small  objects  away  from  the  device  to  prevent  their  getting 

through  the  vent  slots,  which  may  cause  serious  damage  to  your  Set Top  Box.  Getting  of 

insects into the device may also damage the device and, consequently, cause fire.

Cleaning

Disconnect the device from power supply before cleaning. Use soft, slightly damp cloth to 

clean the surface of the casing. Never use any solvents!

Ventilation

Make sure the vent slots are open and the location where the device is installed allows free air 

circulation. Never put the device on a soft surface or cloth. Do not operate and never store the 

device on the heat or under direct sunlight. Never put any other appliances on top of the device.

Connected Devices

Do not connect any unauthorized appliances to the device as it is dangerous and may damage 

the appliance and this device.

Location

Install the device indoors on hard surface. Make sure the device is well protected from direct 

sunlight or moisture.

WARNING: Never remove the top or back panel of the device. The device contains no parts and units which can be 

handled by the user. If necessary, call service center for qualified personnel.

Do not leave the operating device unattended. Make sure it is out of reach of children.

Содержание TA-1001HD



















Отзывы: