15
www.trophy.com.ua
Trophy TA-1001HD User Manual
Satellite scan menu
Transponder list editor menu
Press MENU to enter the MAIN MENU.
Select the “System setup” row and click OK
button.
Select the “Program setup” row and click OK
button.
Select the “Satellite scan menu” row and click
OK button.
Select satellite with
buttons.
You can choose method of satellite scanning. The first method is channel scanning. The second
method is an automatic scanning under transponder list. In addition, if the satellite transport
stream contains NIT data, the receiver will automatically add to the list all new transponders.
After selecting a transponder or after selecting an automatic method, select the “Start
scanning” row and then click OK button. On the screen you will see the process of channel
searching. After searching press MENU button.
Press MENU to enter the MAIN MENU.
Select the “System setup” row and click OK
button.
Select the “Program setup” row and click OK
button.
Select the “Transponder list editor” row and
click OK button.
Select satellite name with
buttons.
Select the “Select transponder” row.
Delete unnecessary transponders using the
RED button.
Enter the frequency, symbol rate, modulation type and polarization of new transponder. Press
GREEN button to add a new trasponder. Thus save the settings on all transponders of this
satellite.
Two scales at the bottom indicate the level and quality of the signal on each transponder. Now
you are ready to process a channel search on the satellite. Press MENU to enter the PROGRAM
SETUP menu.
