Slider plate(Left)
Slider plate(Right)
Step 2
：
Assemble slider plate
Slider plate (Left) 1pcs
Slider plate (Right) 1pcs
2. Put 2pcs aluminum 2, through Left and Right slider plat
component respecitve, as same as the illustration.
Note: The wheels are on the side without holes, the slide plate is
on the side with the four holes.
Assemble parts specifications and quantity
：
Alu. profile 2
20*20*460mm
2pcs
Screws
PM5*25mm
4pcs
PM4*8mm
screws 4pcs
M4 T nut
4pcs
1, Respectively insert 2pcs PM4*8mm screws to Left and Right slider
plate , lock with M4 T nut , as same as the illustration.
3.Put the aluminum 2 components into the end of the aluminum frame 3
of the bottom frame, then secured by 4pcs screw PM5*25, as same as
the illustration.
Aluminium Frame
Pay attention to the sink hole
The eccentric nut
Adjust pulley clearance by rotating eccentric nut
