Feeding tube
Print platform sticker
Step 12
：
Assemble Decorative strip and Feeding tube
Assemble parts specifications and quantity:
1.Put the feeding tube into the hole of the Air cock,insert feeding tube
，
press the outer plastic ring of Air cock
，
loosen the plastic ring,stuck the
feeding tube
，
same as illustration,move the feeding tube up and down
to make sure it is clenched
2.Align the end seal with the end aluminum profile,then press the seal
into the groove of the aluminum profile,same as illustration.
3, Place the print platform sticker on the heatbed.
Main framework
Aluminium profile seal
Feeding tube 1pcs
Print platform sticker 1pcs
