Step 14 Assemble Z motor
Parts:
42 Stepper motor – 1pcs
Z-motor seat – 1pcs
Coupling (with grub screw in it) – 1pcs
Threaded rod 260mm – 1pcs
M3-8mm screw – 4pcs
M4-12mm screw – 2pcs
M4 T-Nut – 2pcs
Place 1pcs 42 stepper motor back of the Z slide
rail , put the motor seat on the motor and then
secure them with 4pcs M3-8mm screws.
Install them to the Z slide rail using 2pcs M4-
12mm screws and T-Nuts.
Take 1pcs threaded rod through the brass
nut ,then insert to the coupling and tighten up.
