Step 9 Assemble Z Carriage
Parts:
2020 Aluminium profile 285mm – 1pcs
X-motor mount (acrylic) – 1pcs
Extruded bracket – 1pcs
Brass nut – 1pcs
Plastic pillar – 6pcs
Wheel – 3pcs
M5-40mm screw – 3pcs
M5 Locknut – 3pcs
M3-8mm screw – 3pcs
M4-8mm screw – 2pcs
M4 T-Nut - 2pcs
Insert 3pcs M5-40mm screws to X-motor mount ,
and then scure it to the aluminium profile using
2pcs M4-8mm screws and T-nuts.
Put the wheels into M5-40mm screws, using
plastic pillars between wheel and acrylic, secure
the Extruded bracket using M5 nuts.
Place the brass nut on the extruded bracket,
scure it using 3pcs M3-8mm screws .
