TRONXY P802M, Руководство по установке

Страница: 9 / 28

Step 6 Assemble Z-axis motor
coupling
M3*20mm screws
M3*10mm screws
Z-axis motor
support(side)
Z-axis motor
support(top)
Z-axis motor

Put two Z-axis motor support(side) in two
sides of the motor, Cover the Z-axis motor
support(top) on the top, locking with
M3*20mm screws & nuts.

The cable of Z-axis motor is back of the Z-axis
motor support. Locking Z-axis motor with
four M3*10mm screws.

Put the coupling on the motor, locking with
the jackscrews.

Another Z-axis motor is the same assembly.
Note: There are 2pcs Z axis motors . See the
hole , the right motor put the hole on the
right , the left motor put the hole on the
left . (The picture shows the right motor )