9
LOCK NUT
The Lock Nut holds the string.
STRING RECESS
The string recess guides the string.
STRING SHAFT
The string shaft winds the string.
BE AWARE:
Do not use a tool to tighten the lock nut because parts inside the RoboHead
might get damaged by applying extreme force. Just use a 1cent coin to tighten the lock nut.
HOW TO CHANGE THE STRINGS:
You might need a couple of tools. We suggest the following:
●
Side cutting pliers to cut the strings.
●
A neck cradle to secure the neck.
STEPS:
1. Take off the old strings – Do it one by one to keep the order and the tension. You
have to turn the RoboHeads manually in order to loosen the strings.
2. Every string is secured with the ball end inside the bridge the guitar. After
loosening the RoboHead by turning the key manually, you can unscrew the lock
nut and take off the string. Just remove the string pin, grab it at the ball end
and pull it out.
3. To install a new string just put the ball end of the string in the specific hole and
lock it with a string pin.
4. Now you can pull the string over the saddles and the frets through the headstock
nut at the end of the neck to apply it to the RoboHeads permanently.
