Tronic TKHQ 10 A1, Руководство по эксплуатации

Страница: 19 / 82

TKHQ 10 A1 ■ 16
│
GB
│
CY
Status of the car cradle LED
The LED
3
lights up as follows depending on the operating status:
LED Operating status
White LED lights up for 3 seconds
Car cradle is being supplied with
power and is ready for use
White LED lights up permanently Mobile phone is being charged
White LED off Stand-by
White LED flashes
Mobile phone is not compatible
Error message
Troubleshooting
A connected device is not charging (the white operating LED
8
on the car/USB adapter
0
does not light up)
♦
No connection to the cigarette lighter . Check the connection .
♦
Depending on the vehicle type, it is possible that the ignition has to be
switched on first .
The white operating LED
8
goes out after a device has been
connected
♦
The car/USB adapter
0
is overloaded and will no longer charge con-
nected devices . The internal overcurrent protection has been triggered .
Disconnect all connected devices from the car/USB adapter
0
.
The white operating LED
8
lights up immediately and the car/USB
adapter
0
is ready for use again .