Tronic TKHQ 10 A1, Руководство по эксплуатации

Страница: 17 / 82

TKHQ 10 A1 ■ 14
│
GB
│
CY
NOTE
►
The 12 V output voltage from the USB socket (green)
9
may be
lower if there are unfavourable conditions in your vehicle, e .g . when
the engine is switched off or the car battery is weak . This may result in
a longer charging time for your external playback device .
Operation and use
Charging your mobile phone wirelessly
NOTE
►
The car cradle is not suitable for using the mobile phone in a horizontal
direction .
►
Some mobile phones need to be taken out of their case for charging .
►
At ambient temperatures above 25°C, the charging power is reduced
to protect against overheating . This increases the charging time of
your mobile phone .
►
When a non-compatible mobile phone is placed in the car cradle, the
LED
3
flashes . Use a suitable adapter for induction charging .
♦
Place the mobile phone on the supports
5
of the car cradle . The weight
of the mobile phone causes the holding clamps
6
to move inwards
automatically .
♦
Charging starts immediately and is indicated on the display of the
mobile phone . The LED
3
lights up permanently, also signalling that
the mobile phone is being charged .
♦
Adjust the tilt of the car cradle so that the viewing angle of your mobile
phone meets your needs . Undo the screw ring
r
a little to make it
easier to adjust the ball joint
t
.