background image

 

   

 

  Press the > button to increase the water temperature. 

  Press the < button to decrease the water temperature. 

 

 

  Press this button to go to the mode of seat temperature adjustment. 

  Press the > button to increase the seat temperature. 

  Press the < button to decrease the seat temperature. 

 
 
 

  Press this button to go to the mode of fan temperature adjustment. 

  Press the > button to increase the fan temperature. 

  Press the < button to decrease the fan temperature. 

 
 

Gear Position Indicator Light    

  The                [Gear Position Indicator Light] will display the current gear position. 

  The 

water pressure adjustment, spray wand position adjustment, and the temperature 

adjustments

 have four gear positions: Close, Low, Mid, and High. If it is out of gear 

position, the unit responds with two beeps showing the operation is invalid. The correct 
operation has only one beep. 
 

 

 

SPA     

  When the user is seated, long press the [SPA] button for more than 2 seconds to start the 

SPA function.

 

  When the SPA function is open, it will start the Memory Cleaning function, Gear Position, 

Strong & Weak Massage, and Hot & Cold Massage functions. 

 

  Long press the [Clean Guard] button once more for more than 2 seconds to close the 

Stop & Weak Massage and Hot & Cold Massage functions.

 

  Short press the [Stop] button to stop the SPA function. After that, continue cleaning for 

about 5 minutes and then it will stop washing and switch to drying automatically. 

 

 

Strong & Weak Massage  

  Long press the       [Rear Wash] button to turn on/off the Rear Wash function when the 

user is seated. The water pressure starts changing. The corresponding relationships 
between the gear position of strong & weak massage and water pressure are as follows: 
Water Pressure: Close, Low                               Strong & Weak Massage: Low 
Water Pressure: Mid                                           Strong & Weak Massage: Mid 
Water Pressure: High                                     Strong & Weak Massage: High 

 

Cool & Warm Massage 

  Long press the       [Feminine Wash] button to turn on/off the Cool & Warm Massage when 

Содержание 836092
























Отзывы: