TRONE 836092, Инструкция по эксплуатации

Страница: 14 / 23

Adjusting The Flush Time
Press and hold the side Feminine Wash button for 8 seconds to enter into the Flush Time
Adjustment function and adjust the pulse valve time.

The first step: The green light flashes (0.5s dark 0.5s bright) during the pulse valve 1’s
flushing time adjustment. Use the remote control [gear po] and the [gear position -] to
adjust the time, add or minus 0.5s one at a time. The adjustment range is 4 to 10 seconds;
then press the side button for feminine wash entering into the second step: pulse valve 2’s
sewage time adjustment. At this time, yellow light flashes. Please follow the same adjustment
process indicated above.

Then short press the side button for Feminine Wash to enter into the third step: pulse valve
1’s water return time adjustment, At this time, the red light flashes. The adjustment method is
the same as the first step.

Press the side Feminine Wash button to leave the Pulse Valve Time Adjustment Function.

Except for the side Feminine Wash button or the button for water pressure and spray wand
position in the remote, all other buttons can exit the adjustment function.

If the flush time adjustment has reached the limit, there will be a beeping sound that will
indicate operation failure when adjusting. The default flushing times are 5s, 6s, 7s, and the
adjustment range is 4 to 10 seconds.
MANUAL FLUSH KEYS PAIRING THE REMOTE
WITH THE BIDET

Unplug the bidet (tripping the GFCI on the plug
will also work).

Press and hold the SPA button until the 4 lights
on the front of the remote start flashing. Then
release the SPA button.

Hold the remote close to the electronic bidet
combo and at the same time proceed to step 4.

Plug in the toilet (or reset the GFCI) and listen
for the beep. Once the beep sounds, you will
have successfully paired your remote control
with your toilet bidet combo.