Air XD User Manual
www.trolex.com
P5628.1600 Rev A 20
Hardware Installation
Safety Precautions
Refer to
Section 4
of this user manual before undertaking the installation of the Air XD instrument. The
installation location of the Air XD instrument is the prerogative of the installer and care should be taken
to ensure an appropriate position has been selected. Consider the location of a suitable power supply
and external fuses, access to a communications network and the protection of cabling from damage.
1. Secure the Air XD to a suitable mounting surface using the integrated mounting brackets.
2. Ensure that the Air XD is mounted in an upright position.
3. Unlock and open the enclosure door to access the internals of the enclosure.
4. Ensure power is isolated before making electrical connections to the instrument.
5. Power supply voltage and frequency must match the instrument (refer to rating plate).
6. Ensure external switches or fuses are installed where applicable
7. Run the required cables through the cable glands provided in the bottom of the enclosure.
8.
Wire the cables into the relevant terminals on the internal plate
(refer to section 8.4).
9. Tighten the cable gland against the cable to ensure an IP seal.
10. Close and lock the door after use to maintain IP rating of the enclosure.
11. Ensure that the particulate entry and exit ports are not restricted or covered.
Note:
When the door is open, the instrument is susceptible to ingress so care must be taken to ensure
the location is clean during installation.
Mounting Details
Note:
Ensure the Air XD housing is mounted vertically during installation.
4 x M10 Fixing
255mm
362m
m
Содержание TX8005 Air XD General Purpose
Страница 2: ......
Страница 5: ...Air XD User Manual www trolex com P5628 1600 Rev A 4...
