Trojan POWER RACK 400, Сборка и инструкция по эксплуатации

Страница: 13 / 32

STEP 8
Make sure the Upper Cable (50) is in the groove of Pulley (32);
• Install Pulley A into the slot of the Top Cross Frame (1) using one 3/8” x 2-5/8” Hex Bolt (57), two 3/8” Washers (64), two
Bushings (36) and one 3/8” Locknut (67).
• Install Pulley B into the slot of the Top Cross Frame (1) using one 3/8” x 2-5/8” Hex Bolt (57), two 3/8” Washers (64), two
Bushings (36) and one 3/8” Locknut (67).
• Install Pulley D into the bracket of the Top Cross Frame (1) using one 3/8” x 2” Hex Bolt (56), two 3/8” Washers (64) and
one 3/8”Locknut (67).
• Attach the end of the Upper Cable (50) to the Slide Frame (21) using one Chain Hook (30).
• Install Pulley C between the two pieces of the Adjust Pulley Bracket (27) using one 3/8” x 2” Hex Bolt (56), two 3/8” Washers
(64) and one 3/8” Locknut (67).
• Attach the other end of the Upper Cable (50) to the Lat Bar (23) using one Chain Hook (30).
10148-13
4. ASSEMBLY STEPS - CAGE