When cursor is PIN POINTED press CTRL key to lock
cursor in position.
5. Move 2nd.cursor to a point on the screen where the
circumference of the CIRCLE will disect the cursor.
6. Press CTRL key to set 2nd.cursor. Dynamic banding of
CIRCLE will now appear on the screen.
7. You may now PIN POINT 2nd.cursor by using the CRSR
keys. When cursor is PIN POINTED press CTRL key to
lock 2nd.cursor and to draw CIRCLE.
You may now repeat this option as often as required.
Press Q key to leave this option and to return to the
MAIN
MENU
.
FILL
1. Select FILL option.
2. Select FILL pattern from FILL menu which now appears on
the screen.
3. Use pen to place cursor in the enclosed area to be filled.
4. Press CTRL key to set cursor.
5. You may now PIN POINT the cursor by using the CRSR
keys. When cursor is PIN POINTED press CTRL key to
lock cursor in position and to FILL area.
6. Area selected will firstly be filled in the current pen
colour. Border colours will flash while micro computes
area. The area will then revert to the pattern or colour
selected.
7. To quit this option while filling is in operation you must
depress and hold down the SPACE bar until option aborts.
N.B. Area to be filled must be fully enclosed by a solid line to
prevent pattern or colour from “leaking” to surrounding
areas. BRUSH option is not “leak proof”.
It is NOT possible to FILL over a pen colour by using the same
pen as that used to draw that colour originally. This also
applies to background colour.
You may use this option as often as required if pattern is to be
repeated.
Press Q key to leave this option and to return to the
MAIN
MENU
.
TEXT
1. Select TEXT option.
2. Select TEXT size and type required from the TEXT menu
which now appears on the screen.
3. Use CRSR keys to move flashing cursor to required
