BANDING
1. Select BAND option.
2. Use the pen to move the cursor to the required starting
point.
3. Press CTRL key to set 1st.cursor.
4. You may now PIN POINT cursor by using the CRSR keys.
When cursor is PIN POINTED press CTRL to lock
1st.cursor in position.
5. Move 2nd.cursor to required position.
6. Press CTRL key to set 2nd.cursor. Dynamic banding line
will now appear on screen.
7. You may now PIN POINT 2nd.cursor by using the CRSR
keys.
8. Press CTRL key to lock 2nd.cursor and first line in
banding operation will be drawn on the screen.
9. Move the cursor to the third position and follow
instructions 6 to 8 above.
You may carry out the above operation as often as required.
Press Q key to leave this option and to return to the
MAIN
MENU
.
RAYS
1. Select RAYS option.
2. Use the pen to move the cursor to the required centre
position of the RAY.
3. Press CTRL key to set the centre cursor.
4. You may now PIN POINT centre cursor by using the CRSR
keys. When cursor is PIN POINTED press CTRL key to
lock centre cursor.
5. Move 2nd.cursor to required position.
6. Press CTRL key to set 2nd.cursor.
7. You may now PIN POINT cursor by using CRSR keys.
Dynamic banding of line will now appear on screen.
When cursor is PIN POINTED press CTRL key to lock
cursor and to draw first line in RAY.
8. Follow instructions 5, 6 & 7 as often as required to build
RAYS.
Press Q key to leave this option and to return to the
MAIN
MENU
.
LINE
1. Select LINE option.
2. Use the pen to move the 1st.cursor to the point on the
screen where you wish to start line.
3. Press CTRL key to set 1st.cursor.
