The
TROJAN CADMASTER PACK
comprises of a Graphics
program plus a Light Pen and this instruction booklet. The
pack is intended for use by micro users of all ages and any
level of expertise. It can be used to produce any type of
picture from a full colour art display to a black and white
technical drawing. The ‘Pin Point’ function in the program
allows pixel accuracy and the various line thicknesses can be
used to dramatic effect. Please experiment with all the
functions which when combined with all 16 colours and the
three pens give more choices than we mention in this booklet.
Please adjust CONTRAST and BRIGHTNESS on the screen for
best results.
A FEW HINTS ...
Keep the tip of your light pen clean. When using the pen,
always point it directly at and square to the screen, holding it
as you would a normal pen or pencil. Do not apply undue
pressure on the tip of the pen — a light touch is all that is
required.
LOADING THE SOFTWARE
The software supplied in this pack is on cassette tape but can
be acquired on disk by filling in the coupon at the end of this
booklet and sending it with your remittance to the address
given.
1. Insert the cassette into the recorder.
2. Press SHIFT/RUN STOP key.
3. Press PLAY on recorder.
The program will now Load and Auto run.
Loading time is approx. 2.5 minutes.
WHEN THE PROGRAM IS LOADED
1. Plug the Light Pen into the No.1 Port which is on the right
hand side of your micro.
2. Carry out the calibrating procedure as shown on the
screen.
3. The
MAIN MENU
will now appear on the screen.
THE MAIN MENU
To select an option from the menu you must point the tip of the
pen at the centre of the box to the right of the required option.
LINE TYPES
The first column down the left hand side of the menu screen
are all “LINE TYPE” options. When you have selected the
type of line that you require the description on the menu will
