Trojan ALTITUDE 600, Инструкция по уходу и руководство по сборке

Страница: 9 / 30

10221-9
HOW TO APPLY LUBRICANT
• Lift one side of treadbelt.
• Pour one half of the lubricant bottle under the centre of the treadbelt on the top surface of the treadboard.
• Walk on the treadmill at a slow speed for 3 to 5 minutes to evenly distribute lubricant.
NOTE: DO NOT over lubricate treadboard. Any excess lubricant that comes out should be wiped off.
NOTE: ONLY USE HALF THE BOTTLE OF LUBRICANT PER APPLICATION.
• NOTE: If your lubricant is finished, the treadbelt can be lubricated with Dubbin.
LUBRICATION SCHEDULE.
• Check the treadboard lubrication during installation. If it’s necessary, lubricate the treadboard using one half of the
lubricant provided, before using the treadmill for the first time.
• If the treadmill is used on a regular basis, the running deck should be lubricated once a month.
• If the treadmill is not used for two months or more, the treadboard must be lubricated before use.
6. MAINTENANCE
HOW TO CHECK TREADBELT FOR PROPER
LUBRICATION
• Lift one side of the treadbelt and feel the top surface of the
treadboard.
• If the surface is slick to the touch, then no further lubrication is
required.
• If the surface is dry to the touch, apply one packet of lubricant
or half of the bottle of lubricant.
BELT TRACKING ADJUSTMENT
• If during use you notice that the running belt either shifts to the right or the left of centre, switch off the treadmill,
remove the “Safety Key” and unplug the equipment from the AC power source.
• If the running belt shifts left, using Allen Key provided, turn
the left rear roller adjustment clockwise no more than 1/4” of a turn
(if the running belt shifts right, adjust the right rear roller).
• Remove the Allen Key, insert the “Safety Key” and insert the
AC power cord into the AC outlet. Turn on your treadmill and
observe after running for a few minutes to see if the problem
has been corrected.
• This may take several adjustments, so repeat the above procedure.
Your treadmill should require little maintenance other than to periodically apply lubricant. Lubricating under the
treadbelt will ensure superior performance and extend the treadmill’s life expectancy.