Trojan ADRENALINE PRO 300, Инструкция по эксплуатации

Страница: 8 / 17

1358-8
ASSEMBLY STEP
STEP 01
• Prior to assembly of this product, remove all components from
the package and verify all the listed parts are supplied. Once
certain, begin with the first assembly step.
1-1 Install the pop pin (12) into the head tube boss using the
provided adjustable wrench (A)
1-2 Grab the T handle of the pop pin (12) to free it from the
securing threads, and insert the handlebar (5) into the
head tube of the bike simultaneously. Make sure the pop
pin settles into the desired hole and then secure it firmly.
1-3 Pull the pop pin and insert the seat post (6) into the
receptor and secure with the pop pin.
STEP 02
2-1 Attach the left pedal (16L) and the right pedal (16R) with
the adjustable wrench (A). Please be aware that the pedals
are marked L and R on the flat face of the threaded area.
The left and right pedals are referenced from a seated
position on the bike. The left pedal has a left-hand thread
and must be tightened counterclockwise, and the right
pedal must be tightened clockwise.
2-2 Tighten the pedals with the adjustable wrench (A).
STEP 03
3-1 Mount the front stabilizer (4) using two allen bolts (2-3)
and two washers (2-4), then tighten clockwise using the
allen wrench (B).
3-2 Mount the rear stabilizer (2) using two allen bolts (2-3)
and two washers (2-4), then tighten clockwise using the
allen wrench (B).