Troglotech T804 User Manual SD VERSION Page 13
T804 SD-CARD DVR - SNAPSHOTS
Error Messages:
If the SD card is faulty, not fitted correctly or damaged, when a re-
cording is started you will get an error message in the centre of the
screen for 8 seconds. After 12 seconds messages at the bottom of the
screen will show DVR FLASH CARD ERROR - CARD FULL OR MISSING -
PRESS DISP TO CHECK. Pressing the DISP key will show the error as
reported by the DVR.
Switch the system OFF, replace the SD card
and re-start the system
The screen will momentarily show a ‘RECORD’ message and the SNAP-
SHOT ICON will be shown in the top-right of the picture as shown below.
After 1 second the screen will return to the live picture and READY will be
momentarily displayed.
The snapshot will be saved on the SD card in a JPEG format
Take a SNAPSHOT while RECORDING:
A SNAPSHOT can be taken when making a recording using exactly the
same process. Pressing the RIGHT ARROW key as shown above, this will
terminate the current recording, take a snapshot and then start a new
recording.
T804 SD-CARD DVR - OTHER FUNCTIONS
Take a SNAPSHOT:
A SNAPSHOT can be taken by pressing the RIGHT ARROW key as shown
below.