Trixy Aviation G 4-2, Руководство по обслуживанию

Страница: 12 / 128

Maintenance manual G 4-2 Revision 05A – 03.05.2017 Doc. No.: TA-M-D-002-EN
12
Warning : This manual does not substitute the education of an
aviation technician or the authorization of an aviation maintenance
workshop. IT is to be used in addition to the maintenance manuals of
engine and propeller.
Attention: Only persons authorized by the gyrocopter manufacturer
are allowed to perform maintenance and repair works on the
gyrocopter. Persons to perform maintenance and repair works on
either engine or propeller must be authorized by the respective
manufacturer.
Note : All warranties are void in case that the instructions in this
manual are not carefully followed.
2 COMPONENTS
2.1 Introduction
The components used in the gyrocopter series G 4-2 are illustrated and
documented in this section of the maintenance manual.
Bolts and nuts are to be tightened and inspected in accordance with the
data provided in this manual and the tightening torque in the
corresponding tables is to be used as a reference. In doubt, the
maintenance technician or the aviation workshop performing the
maintenance or repair works must contact the manufacturer of the
gyrocopter, the engine manufacturer or the manufacturer of the
propeller for further information.
Engine maintenance must be performed according to the instructions of
the engine manufacturer. Maintenance, repairs or adjustments to the
propeller must be conducted by authorized persons in accordance with
the instructions provided by the propeller manufacturer.
Only original parts and/or components are to be used as spare parts.