Trixy Aviation G 4-2, Руководство по обслуживанию

Страница: 63 / 128

Maintenance manual G 4-2 Revision 05A – 03.05.2017 Doc. No.: TA-M-D-002-EN
63
3.2 Engine oil circuit
1 Pressure regulator 2 Pressure transducer
3 Oil pump 4 Oil tank
5 Oil cooler (heat exchanger) 6 Oil filter
7 Vent line 8 Temperature sensor
9 Thermostat (not shown in the drawing)
The pilot in command must inspect the oil quantity prior to every flight:
1. Switch both ignition circuits off
2. Open the cover of the oil container (4)
3. Rotate the propeller counter clock wise 8
– 10 full rotations.
4. Check the oil level in the container between the middle and the
upper limit of the dip stick.
The pilot in command must insure correct oil pressure and oil
temperature above 50 °C before applying full power. The maximum
allowed oil temperature is 130
°C.