Trix 22833, Руководство пользователя, Страница: 12 / 28

12
can only be done with those designated in the CV table.
Programming on the main track PoM must be supported
by your central controller (Please see the description for
this unit.).
• The default settings (factory settings) can be produced
repeatedly.
• 14/28 or 126 speed levels can be set.
• All of the functions can be controlled according to the
function mapping (see CV description).
• See the CV description for the DCC protocol for additional
information.
We recommend that in general programming should be
done on the programming track.
Controllable Functions
Headlights on Function f0 Function f0
Low speed switching range — Function 1 Function f1 Function f1
ABV, off — Function 4 Function f4 Function f4
STOP mobile station
1 5
f0 f8 f0 f8
f0 - f3 f4 - f7
Logic Functions
Acceleration/Braking Delay
• The acceleration and braking time can be set separately
from each other.
• The logic function ABV can be assigned to any function
button by using the function mapping.