TDR series Digital Recording System
Page:
63
14. EMAP OPERATINGS:
When you select the Emap function from the utility options in System Operation section, depending on the
previous state, one of the following will appear:
The cameras will display in one of three different modes: Recording , idle , or fault .
The tree form graph on the left is for selecting Emaps from different levels when there are 2 or more levels.
Double click the camera to enter the recording full screen. It will show the corresponding recording/idle image
with the camera.
15. EMAP AND ALARM:
In addition to the preset alarm functions, as recording cameras activate alarm functions or an alarm has been
triggered, if you click the Emap button, the triggered camera will display in the Emap. This makes it is easy to
locate the alarming camera and quickly respond to it. (Note: the DVRs must be connected and Camera, Image,
and Alarm setups must be configured correctly. See figures below for example.
To operate the Emap alarm, during recording/Live view, click Stop to enter the IDLE state. Video will pop up
when motion is triggered. Click on the Emap. When the camera has been triggered by motion, that camera will
appear with a red “
!
”. Click on that camera to display its image in full screen. You can drag the window to
another location if it is blocking the display.
