Trivel T-120 Скачать руководство пользователя страница 13

Страница: 13 / 19

Technical adjustments

Brake adjustment

When the brakes wear down with normal
use, the distance between the brake pads
and the rim surface increases. The cable
tension then needs to be adjusted to get
the brake pads closer to the rim and
preserve proper braking force.

To increase cable tension:

Turn the barrel adjuster counter
clockwise to pull cable

Lock the adjustment by turning the
locknut clockwise

Adjusting the chain tension

Chain tension must be adjusted so it does
not allow the chain to drop from the
sprocket.

Correct chain tension is met when there is
a movement of about 6 to 12mm vertically
when pushing the chain up.

▪

Loosen the rear wheel nuts

▪

Pull the wheel to put the chain under
tension

▪

Tighten the rear wheel nuts temporarily

▪

Check and measure the chain tension

▪

Pull or push the rear wheel further into
the frame if needed until the
recommended tension is met

▪

Check that the rear wheel is centered
within the frame center axis

▪

Firmly tighten the rear wheel nuts

▪

Check the brake pads position on the
rim and adjust if needed

Adjusting the gear hub

Your gear hub transmission must be
precisely

synchronised

function

properly. The cable tension controls the
gear synchronism.

Correct cable tension is achieved when
the two adjustment witness lines on the
hub are aligned while the shifter is set on
the 4

gear.

▪

Put the shifter in the 4

gear.

▪

Turn the barrel adjuster on the shifter to
increase or reduce the cable tension
until both adjustment witness lines on
the hub are aligned.

Содержание T-120




















Результаты поиска

Содержание T-120

Отзывы:

Бренды по названию

Популярные бренды

Trivel T-120, Руководство пользователя

Результаты поиска

Содержание T-120

Отзывы:

Бренды по названию

Популярные бренды