10
Adjusting the handlebar height
It is recommended to have this
adjustment made by a qualified
technician as it will require to adjust
the headset bearings. An improper
adjustment of the headset can result in permanent
damage to the component or frame and may lead
to a loss of control, resulting in serious injury or
even death.
1. Loosen the stem clamp and remove
the headset top cap
2. Rearrange the spacers stack above or
below the stem to reach the required
handlebar height
3. Adjust the headset bearing
compression with the top cap bolt
If the handlebar must be fitted on the
lower part of the steering tube, It is
recommended to cut some of the
exceeding length above the stem. Only
a qualified technician with the necessary tooling
and hardware should proceed to this.
4. Tighten the stem clamp
