Maintenance
129
Rear Brake Fluid Inspection and
Adjustment - Accessory Rear Brake
Reservoir (If Equipped)
min
6
3
2
1
5
4
1.
Upper level line
2.
Lower level line
3.
Window
4.
Diaphragm
5.
Diaphragm support ring
6.
Reservoir cap
The brake fluid level in the reservoirs
must be kept between the upper/max
and lower/min level lines (reservoir held
horizontal).
To inspect the fluid level, check the level
of fluid visible in the window at the front
of the reservoir body.
To adjust the fluid level, remove the
reservoir cap.
Fill the reservoir to the upper level line
using new DOT 4 fluid from a sealed
container.
Install the diaphragm and diaphragm
support ring into the fluid reservoir.
Install the reservoir cap and carefully
screw it down, ensuring it is fully
tightened.
Warning
If there has been an appreciable drop
in the level of the fluid in either fluid
reservoir, consult your authorized
Triumph dealer for advice before riding.
Riding with depleted brake fluid levels,
or with a brake fluid leak is dangerous
and
will
cause
reduced
brake
performance potentially leading to loss
of motorcycle control and an accident.
