2 of 8
Note:
•
Before fitting this accessory kit, ensure the
owner of the motorcycle has been informed of
the warnings contained in these instructions.
•
Ensure that the Triumph Tiger Explorer service
manual is available for reference during the
fitting of this accessory kit.
•
Once the alarm/immobiliser has been fitted, it
will become an integral part of the motorcycle
and cannot be removed.
•
A suitable hand-held power drill fitted with a
1 mm diameter drill bit is required to fit this kit.
•
Power supply voltage range - 12 Volt DC
negative earth.
•
System current consumption <2.5 mA in armed
condition.
•
Prior to installation, log the Datatool serial
number printed on the back of the alarm body.
Warning
This accessory kit is designed for use on Triumph
Tiger Explorer and Tiger Explorer XC motorcycles only
and should not be fitted to any other Triumph model or to
any other manufacturer's motorcycle. Fitting this accessory
kit to any other Triumph model, or to any other
manufacturer's motorcycle, may interfere with the rider
and could affect the handling, stability or other aspects of
the motorcycle's operation which may result in loss of
motorcycle control and an accident.
Warning
Always have Triumph approved parts, accessories and
conversions fitted by a trained technician of an authorised
Triumph dealer. The fitment of parts, accessories and
conversions by a technician who is not of an authorised
Triumph dealer may affect the handling, stability or other
aspects of the motorcycle's operation which may result in
loss of motorcycle control and an accident.
Warning
Throughout this operation, ensure that the motorcycle is
stabilised and adequately supported on a paddock stand
to prevent risk of injury from the motorcycle falling.
Warning
A torque wrench of known accurate calibration must be
used when fitting this accessory kit. Failure to tighten any
of the fasteners to the correct torque may affect
motorcycle performance, handling and stability. This may
result in loss of motorcycle control and an accident.
Warning
Always ensure that newly installed wiring does not chafe
against other parts of the motorcycle such that they may
be rubbed through and cause an electrical problem. This
condition is hazardous and could give rise to a dangerous
riding condition resulting in a fire, loss of motorcycle
control and/or an accident.
Warning
Prolonged storage of the machine with the alarm armed
will result in battery drain. Excessive battery drain will
cause permanent damage to the battery. The machine
should be connected to an appropriate battery conditioner
to maintain good battery condition.
