Triumph Sprint GT Скачать руководство пользователя страница 98

Страница: 98 / 130

Maintenance and Adjustment

Spring Pre-Load Adjustment -
Sprint ST

1. Spring pre-load adjuster

The spring pre-load adjuster is situated on
the left hand side of the motorcycle, at the
top of the rear suspension unit.

To adjust the spring pre-load setting rotate
the slotted adjuster clockwise to increase, or
counter-clockwise to decrease.

Note:

•

The setting is measured as the
number of adjuster 'clicks' out
from the fully screwed in position.

•

The motorcycle is delivered from
the factory with the spring
pre-load set to 20 'clicks' out from
the fully screwed in position.

Spring Pre-Load Adjustment -

Sprint GT

1. Spring pre-load adjuster

The spring pre-load adjuster is situated on
the right hand side of the motorcycle, above
the swinging arm.

To adjust the spring pre-load setting rotate
the slotted adjuster clockwise to increase, or
counter-clockwise to decrease.

Note:

•

The setting is measured as the
number of adjuster turns out from
the fully screwed in position.

•

The motorcycle is delivered from
the factory with the spring
pre-load set to 30 'clicks' out from
the fully screwed in position.

ccnt

cgdq

Содержание Sprint GT



































































































































Результаты поиска

Содержание Sprint GT

Отзывы:

Похожие инструкции для Sprint GT

Бренды по названию

Популярные бренды

Triumph Sprint GT, Руководство пользователя

Результаты поиска

Содержание Sprint GT

Отзывы:

Похожие инструкции для Sprint GT

Бренды по названию

Популярные бренды