117
Headlight Bulb Replacement -
Daytona 675
It is not necessary to remove the headlight
when bulb replacement becomes necessary.
1. Headlight unit
2. Bulb retainer (right hand shown)
To replace a bulb:
Remove the rider's seat.
Disconnect the battery, negative (black) lead
first.
Remove the four screws and remove the bulb
cover from the bulb to be replaced.
Disconnect the multi-plug from the bulb
retainer.
Detach the bulb retainer from the headlight
assembly by rotating it counter-clockwise.
Remove the bulb from the bulb retainer.
Installation is the reverse of the removal
procedure.
Position Lamp Bulb Replacement
1. Bulb holder
2. Position lamp bulb
The position lamps are fitted to the left and
right of each headlight. To replace a bulb,
remove the two screws and remove the bulb
cover, detach the rubber retainer from the
headlight and pull out the bulb.
Installation is the reverse of the removal
procedure.
Caution
The use of non-approved headlight bulbs
may result in damage to the headlight lens.
Use a genuine Triumph supplied headlight
bulb as specified in the Triumph Parts
Catalog.
Always have replacement headlight bulbs
installed by an authorized Triumph dealer.
Warning
The bulbs become hot during use. Always
allow sufficient time for the bulb to cool
before handling. Avoid touching the glass
part of the bulb. If the glass is touched or
gets dirty, clean with alcohol before reuse.
2
1
cdls
2
1
cdlr
