Maintenance and Adjustment
97
Installation
Installation is the reverse of removal
noting the following.
Reinstall the screws securing the fairing
to the frame and tighten to
44 lbf in
(5 Nm)
.
Reinstall the screws securing the fairing
lower halves to each other and tighten
to
27 lbf in (3 Nm)
.
Tighten the frame protector screws to
80 lbf in (9 Nm)
(if equipped).
Reinstall the screws securing the cockpit
to the fairing and tighten to
27 lbf in
(3 Nm)
.
Reinstall the right hand cockpit infill
panel and tighten the screw to
27 lbf in
(3 Nm)
.
Connect the battery leads, positive (red)
lead first.
Reinstall the battery strap.
Reinstall the rider's seat and tighten the
screws to
80 lbf in (9 Nm)
.
Street Triple, Street Triple R and
Street Triple Rx
The expansion tank cap can be located
at the left hand side of the motorcycle,
adjacent to the side stand.
Remove the cap from the expansion
tank and add coolant mixture through
the filler opening until the level reaches
the MAX mark. Reinstall the cap.
1.
Coolant expansion tank
2.
Coolant expansion cap
3.
Upper fluid level
4.
Lower fluid level
Caution
If the coolant level is found to be low,
or if coolant has to be added regularly,
inspect the cooling system for coolant
leaks. If necessary, pressure test the
system to locate the source of the
leak and rectify as necessary. Loss of
coolant may cause the engine to
overheat and suffer severe damage.
chrw
4
3
1
2
