General Information
61
Passenger Seat
Daytona 675, Daytona 675 R and
Street Triple Rx
1.
Seat lock
2.
Passenger seat
The seat lock is located on the left hand
side of the rear bodywork, in line with
the footrest mounting rail. To remove
the rear seat, insert the ignition key into
the seat lock and turn it
counterclockwise while pressing down
on the rear of the seat. This will release
the seat from its lock and allow it to be
slid forwards for complete removal from
the motorcycle.
To reinstall the seat, engage the seat's
tongue under the bracket and press
down at the rear to engage in the seat
lock. An audible click can be heard when
the seat is fully engaged in its lock.
Seat Care
To prevent damage to the seat or seat
cover, care must be taken not to drop or
lean the seat against any surface which
may damage the seat or seat cover.
1
2
Caution
To prevent damage to the seat or seat
cover, care must be taken not to drop
the seat. Do not lean the seat against
the motorcycle or any surface which
may damage the seat or seat cover.
Instead, place the seat, with the seat
cover facing upwards, on a clean, flat
surface which is covered with a soft
cloth.
Do not place any item on the seat
which may cause damage or staining
to the seat cover.
Warning
To prevent detachment of the seat
during riding, after installation always
grasp the seat and pull firmly
upwards. If the seat is not correctly
secured in the lock, it will detach from
the lock. A loose or detached seat
could cause loss of motorcycle control
and an accident.
