Maintenance and Adjustment
139
Headlight Adjustment - Horizontal
1.
Headlight mounting nut
The horizontal beams of both headlights
can be adjusted individually. The same
procedure is used to adjust either
headlight.
Switch the headlight dipped beam on.
Loosen the headlight mounting nut.
Adjust the left or right horizontal
position of the headlight to give the
required beam setting.
Tighten the nut to
22 lbf ft (30 Nm)
.
Repeat for the second headlight.
Re-check the headlight beam settings.
Switch the headlights off when both
beam settings are satisfactorily set.
Headlight Bulb Replacement -
Daytona 675 and Daytona 675 R
It is not necessary to remove the
headlight when bulb replacement
becomes necessary.
To replace a bulb:
Remove the rider's seat.
Disconnect the battery, negative (black)
lead first.
1
cgfc_3
Caution
The use of non-approved headlight
bulbs may result in damage to the
headlight lens.
Use a genuine Triumph supplied
headlight bulb as specified in the
Triumph Parts Catalog.
Always have replacement headlight
bulbs installed by an authorized
Triumph dealer.
Warning
The bulbs become hot during use.
Always allow sufficient time for the
bulb to cool before handling. Avoid
touching the glass part of the bulb. If
the glass is touched or gets dirty,
clean with alcohol before reuse.