Triumph Bonneville Bobber, Руководство пользователя

Страница: 89 / 142

Maintenance
89
Clutch
2
1
1. Clutch lever
2. 2 - 3 mm
The motorcycle is equipped with a
cable-operated clutch.
If the clutch lever has excessive free
play, the clutch may not disengage fully.
This will cause difficulty in changing
gear and selecting neutral. This may
cause the engine to stall and make the
motorcycle difficult to control.
Conversely, if the clutch lever has
insufficient free play the clutch may
not engage fully, causing the clutch to
slip, which will reduce performance and
cause premature clutch wear.
Clutch lever free play must be
checked in accordance with scheduled
maintenance requirements.
Clutch Inspection
Check that there is 2 - 3 mm clutch
lever free play at the lever.
If there is an incorrect amount of free
play, adjustments must be made.
Clutch Adjustment
To adjust the clutch, do the following:
• Turn the adjuster sleeve until the
correct amount of clutch lever free
play is achieved.
• Check that there is 2 - 3 mm clutch
lever free play at the lever.
• If there is an incorrect amount of
free play, adjustments must be
made.
• If correct adjustment cannot be
made using the lever adjuster, use
the cable adjuster at the lower end
of the cable.
• Loosen the adjuster locknut.
• Turn the outer cable adjuster to give
2 - 3 mm of free play at the clutch
lever.
• Tighten the locknut to 3.4 Nm.