Triumph Bonneville Bobber Скачать руководство пользователя

Страница: 113 / 142

Maintenance

113

Should the battery voltage fall below

12.7 Volts, the battery should be charged

using a Triumph approved battery

charger. Always remove the battery

from the motorcycle and follow the

instructions supplied with the battery

charger.
For extended periods of storage

(beyond two weeks) the battery should

be removed from the motorcycle and

kept charged using a Triumph approved

maintenance charger.
Similarly, should the battery charge

fall to a level where it will not start the

motorcycle, remove the battery from

the motorcycle before charging.

Battery Installation

Warning

Before starting work, make sure

the motorcycle is stabilised and

adequately supported.
This will help prevent it from falling

and causing personal injury and/or

damage to the motorcycle.

Warning

Make sure that the battery terminals

do not touch the motorcycle frame.
This may cause a short circuit or spark

which would ignite battery gases

causing a risk of personal injury.

To install the battery:
• Make sure the battery strap is

correctly positioned on the hook at

the rear of the battery cage.

• Position the battery strap guide and

battery in the battery tray, routing

the negative (black) battery lead as

noted during removal.

• Connect the positive (red) battery

lead to the battery and tighten to

4.5 Nm. Push the battery fully into

the battery tray.

L0124

3
4

1.  Engine ground connection
2. Battery
3.  Battery strap guide
4.  Battery strap
5.  Battery positive connection

• Secure the battery with the battery

strap.

• Connect the negative (black)

battery lead to the engine ground

connection on the frame and

tighten to 6 Nm.

• Install the battery cover, lower edge

first. Make sure that the rubber

seals are positioned correctly.

Содержание Bonneville Bobber















































































































































Результаты поиска

Содержание Bonneville Bobber

Отзывы:

Похожие инструкции для Bonneville Bobber

Бренды по названию

Популярные бренды

Triumph Bonneville Bobber, Руководство пользователя

Результаты поиска

Содержание Bonneville Bobber

Отзывы:

Похожие инструкции для Bonneville Bobber

Бренды по названию

Популярные бренды