Triumph Bonneville Bobber, Руководство пользователя

Страница: 46 / 142

General Information
46
Note
A lighting on/off switch is not fitted
to this model. The position light, rear
light and licence plate light all function
automatically when the ignition is
turned to the ON position.
The headlight will function when the
ignition switch is turned to the ON
position. The headlight will go off while
pressing the starter button until the
engine starts.
SCROLL Button
The SCROLL button is used to
operate the following functions of the
instruments:
• Odometer functions (see page 33)
• Trip reset (see page 33)
• Clock reset (see page 33)
• Traction control functions (see
page 37).
Cruise Control Button
When the cruise control button is
pressed, the cruise control is on. Cruise
control remains on until the button
is pressed again to turn off the cruise
control. Cruise control can be switched
on or off at any time but it cannot be
activated until certain conditions have
been met. For more information, see
page 38.
Daytime Running Lights (DRL)
Switch
When the ignition is switched
ON and the daytime running
lights switch is set to
DAYTIME RUNNING LIGHTS,
the daytime running lights warning light
will illuminate.
The daytime running lights and low
beam headlights are operated manually
using a switch on the left hand switch
housing.
Warning
Do not ride for longer than necessary
in poor ambient light conditions with
the Daytime Running Lights (DRL) in
use.
Riding with the daytime running lights
when dark, in tunnels or where poor
ambient light is apparent may reduce
the riders vision or dazzle other road
users.
Dazzling other road users or reduced
vision in low ambient light levels may
result in loss of motorcycle control and
an accident.
Note
During daylight hours the daytime
running lights improve the motorcycles
visibility to other road users.
Low beam headlights must be used
in any other conditions unless the
road conditions allow for high beam
headlights to be used.