Triumph Bonneville Bobber 2016 Скачать руководство пользователя

Страница: 97 / 120

Maintenance

Disconnect the negative (black) lead

from the engine ground connection

bracket. Do not remove the bracket

from the engine.

L0124

3
4

Engine ground connection

2. Battery

Battery strap guide

Battery strap

Battery positive terminal

Loosen the battery strap and partially

slide the battery out of the battery tray

in order to gain access to the positive

battery connection.
Disconnect the positive (red) lead from

the battery.
Remove the battery and battery strap

guide from the battery tray, noting the

routing of the negative (black) battery

lead for installation.

Battery Disposal

Should the battery ever require

replacement, the original battery must

be handed to a recycling agent who will

make sure that the dangerous

substances from which the battery is

manufactured do not pollute the

environment.

Battery Maintenance

Warning

Battery acid is corrosive and poisonous

and will cause damage to unprotected

skin. Never swallow battery acid or

allow it to come into contact with the

skin. To prevent injury, always wear

eye and skin protection when handling

the battery.

Clean the battery using a clean, dry

cloth. Make sure that the cable

connections are clean.
The battery is a sealed type and does

not require any maintenance other than

checking the voltage and routine

recharging when required, such as

during storage (see the following

paragraphs).
It is not possible to adjust the battery

acid level in the battery; the sealing

strip must not be removed.

Battery Discharge

Caution

The charge level in the battery must be

maintained to maximize battery life.
Failure to maintain the battery charge

level could cause serious internal

damage to the battery.

Содержание Bonneville Bobber 2016

























































































































Результаты поиска

Содержание Bonneville Bobber 2016

Отзывы:

Похожие инструкции для Bonneville Bobber 2016

Бренды по названию

Популярные бренды

Triumph Bonneville Bobber 2016, Руководство пользователя

Результаты поиска

Содержание Bonneville Bobber 2016

Отзывы:

Похожие инструкции для Bonneville Bobber 2016

Бренды по названию

Популярные бренды