Maintenance
102
Caution
Do not cover the headlight or lens with
any item likely to obstruct air flow to,
or prevent heat escaping from, the
headlight lens.
Covering the headlight lens during
operation with items of clothing,
luggage, adhesive tape, devices intended
to alter or adjust the headlight beam or
non genuine headlight lens covers will
cause the headlight lens to overheat
and distort, causing irreparable damage
to the headlight assembly.
Damage caused by overheating is not
considered a manufacturing defect and
will not be covered under warranty.
If the headlight must be covered
during use - such as taping of the
headlight lens required during
closed-course conditions - the
headlight must be disconnected.
Headlight Adjustment
Note:
• Always make sure the handlebars
are in the straight ahead position
when checking and adjusting the
headlight beam setting.
cjwn
1
1.
Headlight assembly mounting bolt
Vertical adjustment of the headlight
beam is controlled by loosening the
headlight assembly mounting bolt and
altering the position of the headlight
assembly.
Retighten the fasteners after
adjustment to
19 lbf ft (26 Nm).
