General Information
38
Horn Button
When the horn button is pushed, with
the ignition switch turned to the ON
position, the horn will sound.
Turn Signal Switch
When the turn signal switch is pushed
to the left or right, the corresponding
direction indicators will flash on and off.
The turn signal switch will always return
to the central position.
The turn signals can only be canceled
manually. To manually turn off the turn
signals, press and release the indicator
switch in the central position.
High Beam Button
When the high beam button is pressed
the high beam will be switched on. Each
press of the button will swap between
dip and high beam.
Note:
• A lighting on/off switch is not
installed on this model. The position
light, brake/tail light and license
plate light all function automatically
when the ignition is turned to the
ON position.
• The headlight will function when
the ignition switch is turned to the
ON position. The headlight will go
off while pressing the starter
button until the engine starts.
Throttle Control
2
1
1.
Throttle open position
2.
Throttle closed position
All models have an electronic throttle
twist grip to open and close the
throttles via the engine Electronic
Control Module (ECM). There are no
direct-acting cables in the system.
The throttle grip has a resistive feel to it
as it is rolled rearwards to open the
throttles. When the grip is released it
will return to the throttle closed position
by its internal return spring and the
throttles will close.
There are no user adjustments for the
throttle control.
