EN
Alarm kit contents
Fitting kit contents
Note:
•
It is a Thatcham requirement that
the MIRRC evaluation number is
also shown on the certificate of
installation supplied to the
customer. This evaluation number
varies from Triumph model to
model, dependent upon the fitting
kit used.
•
Write the relevant MIRRC
evaluation number as indicated
below onto the certificate of
installation, next to the alarm serial
number.
1.
Alarm unit
1 off
2. Transmitter
2 off
3. S4 user guide
1 off
4. Quick reference guide
1 off
5. Certificate of installation
1 off
1.
Adhesive backed reed switch
1 off
2. Adhesive backed magnet
1 off
3. 3 mm self tapping screws
4 off
4. Adhesive backed foam pads
2 off
5. Cable ties
5 off
6. Isopropanol wipe
1 off
7.
Application chart
1 off
8. Heat shrink tubing
1 off
9. Lanyard
1 off
10. Set of key blade conversion
fillets
2 off
Triumph
kit part
number
Type
Model
MIRRC
evaluation
number
A9808092
R
Daytona
675
TMC1 - 232 /
1105
Warning
If, after fitment of this accessory kit, you have
any doubt about the performance of any
aspect of the motorcycle, contact an
authorised Triumph dealer and do not ride
the motorcycle until the authorised dealer
has declared it fit for use. Riding a
motorcycle when there is any doubt as to
any aspect of the performance of the
motorcycle may result in loss of control of
the motorcycle leading to an accident.
Warning
The motorcycle must not be operated above
the legal road speed limit except in
closed-course conditions.
Warning
Only operate this Triumph motorcycle at
high speed in closed-course on road
competition or on closed-course racetracks.
High speed operation should only be
attempted by riders who have been
instructed in the techniques necessary for
high speed riding and are familiar with the
motorcycle’s characteristics in all conditions.
High speed operation in any other
circumstances is dangerous and will lead to
loss of motorcycle control and an accident.
Publication part number A9900449, Issue 2, ADC 9148
© Triumph Designs Ltd 2009.
