39
General Information
Seat - Sprint ST
1. Seat fasteners
Two seat fixings are located under the rear
edge of the seat. To remove the seat, push
back the rear edge of the seat and unscrew
the exposed fixings. Remove the fixings and
collect the two flanged washers. Raise the
seat and slide rearwards for complete
removal from the motorcycle.
To refit the seat, engage the seat's tongues
under the fuel tank and slide the seat
forwards to engage.
Refit the flanged washers and fixings.
Tighten the seat fixings to
3 Nm
.
Seat - Sprint GT
1. Seat lock
The seat lock is located on the left hand side
of the battery tray, in line with the footrest
mounting rail. To remove the seat, insert the
ignition key into the seat lock and turn it
anti-clockwise while pressing down on the
rear of the seat. This will release the seat from
its lock and allow it to be slid rearwards for
complete removal from the motorcycle.
To refit the seat, engage the seat's two front
hooks under the fuel tank, engage the centre
hooks under the rear subframe bridge and
slide the seat fully forwards. Press down at the
rear to engage in the seat lock.
Warning
The silencer heat shield is located directly
below the seat and may be hot to the
touch. Do not touch the heat shield as
contact with the hot heat shield may cause
the skin to become burned.
ccxg
1
Warning
To prevent detachment of the seat during
riding, after fitting always grasp the seat
and pull firmly upwards. If the seat is not
correctly secured, it will detach from the
lock. A loose or detached seat could cause
loss of motorcycle control and an accident.
cgdi
1
