Step 6
Assembling the chain supports:
Insert the narrow end of the chain
support pole (#3) into the basket pole by
aligning the pushbutton with the basket
pole hole. Make sure the pushbutton
protrudes completely through the hole.
Next, slide the chain support section with
the sleeve onto the pole and align the
hole in the sleeve with the pole
pushbutton. Make sure the pushbutton
protrudes completely through the sleeve
hole.
Step 7
Place the hole in the disk of the second half of chain support section onto the threaded
shaft. Tighten the chain support so the tabs on either end of the sections align with the
support bars and press the sections together. Place the silver washer (#10) onto the
threaded shaft and screw the flag pole support (#7) onto the threaded shaft.
#7
#10
