STEP 4
Attach the End Leg Apron
(#6)
to the leg assembly from the inside using
pilot holes with Screws
(#32)
.
Tighten, but do not strip out
Screws(#32) .
Repeat procedure for the other leg assembly.
Attach Leg Levelers
(#31)
to the
bottom of each leg.
PARTS REQUIRED:
2 pcs -
#6
End Leg Apron
4 pcs -
#31
Leg Leveler
8 pcs -
#32
3.5x16mm Phillips Round Head Screw
Use pilot holes
Use pilot holes
Attach Leg
Levelers
Attach Leg
Levelers
INSIDE OF LEGS
PARTS REQUIRED:
2 pcs -
#8
Lower Frame Side Apron
8 pcs -
#26
1/4”x1-1/4” Allen Head Bolt
8 pcs -
#39
Leg pedestal
Corner Brace
Lower Frame Side Apron
16mm Washer
STEP 5
With the help of another adult, attach the
Lower Frame Side Apron s
(#8)
to the assembled
Legs by aligning the holes in the corner braces
on leg pedestal with the predrilled holes in
the Lower Frame Side Apron
(#8)
using
Bolts
(#26)
and Washers
(#39).
6
Leg
32
For clarity , the wooden
For clarity , the wooden
Corner braces are removed
from this drawing.
Pre-installed
T-Nut
Tighten, but do not strip out
Bolts(#26) .
9
32
31
6
