Exposed barre
l
nuts this side.
Exposed barrel
nuts this side.
(Factory installed)
(Factory installed)
NOTE:
Be sure to orientate
Lock/Latches as per diagram
for correct operation
.
STEP 2
Attach 2 Lock/Latchs
(#30)
into the cut outs on Leg Top End Apron
(#5)
with Bolts
(#28)
and
Nuts
(#33)
. Repeat the step for the other Apron
(#5)
.
PARTS REQUIRED:
2 pcs -
#5
Leg Top End Apron
4 pcs -
#30
Lock/Latch
8 pcs -
#28
4x24mm Allen Head Bolts 8 pcs -
#33
5/32“Nut
PARTS REQUIRED:
2 pcs -
#2
Leg-Left
2 pcs -
#3
Leg-right
2 pcs -
#7
Ball Storage Board-Lower
8 pcs -
#25
1/4”x1-1/2”Allen Head Bolt
8 pcs -
#29
5x40mm Phillips Flat Head Screw
8 pcs -
#39
16mm Washer
STEP 3
Attach the Leg Top End Apron
(#5)
Note:
Corner Braces
This Side.
to
Leg-Left
(#2)
and Leg-Right
(#3)
with
Bolts
(#25)
and Washers
(#39)
.
Screw the Ball Storage Board-Lower
(#7)
to the Leg Top End Apron
(#5)
.
using Screws
(#29)
into predrilled holes.
Tighten, but do not strip out
Screws(#29).
Repeat the step for the other Leg assembly.
NOTE:
Please study diagram closely
to ensure correct assembly.
NOTE:
Make sure slot is at top
8
33
33
28
30
5
