Triumph Adler P-4532DN, Руководство по эксплуатации

Страница: 181 / 282

8-31
Setup and Registration (System Menu) > System Menu
Timer Setting
[ Menu ] key > [ ▲ ] [ ▼ ] key > [ Device Common ] > [ OK ] key > [ ▲ ] [ ▼ ] key > [ Timer Setting ] > [ OK ] key
Configure settings related to the time.
Item Description
Auto Panel Reset If no jobs are run for a certain period of time, automatically reset settings and return to the
default setting. Select to use Auto Panel Reset or not.
Value : Off, On
NOTE
The time allowed to elapse before the panel is reset is set with the "PanelReset Timer".
PanelReset Timer (page 8-31)
PanelReset Timer If you select [ On ] for Auto Panel Reset, set the amount of time to wait before Auto Panel Reset.
Value : 5 to 495 seconds (in 5 second increments)
NOTE
This function is displayed when [ Auto Panel Reset ] is set to [ On ].
Sleep Level Set. -
Sleep Level (models
except for Europe) Select the Sleep level.
Set the Energy Saver mode to reduce power consumption even more than Quick Recovery
mode.
Value : Quick Recovery, Energy Saver
NOTE
When the optional Network Interface Kit is installed, this is not displayed.
Status Set whether to use the Energy Saver mode for the following functions individually:
•
Card Reader
*1
• Application
Value : Off, On
NOTE
When the machine enters Energy Saver, the ID card cannot be recognized.
Sleep Timer Set amount of time before entering Sleep.
Value :
1 to 120 minutes (1 minute increments)
Sleep and Auto Sleep (page 2-25)
Power Off Rule (models for
Europe) Select whether or not the machine enters Power Off mode for the following function.
Select [
On ] to set the Power Off mode.
• Network
• USB Cable
• USB Host
• RAM Disk
• NIC
*2
Value : Off, On
NOTE
Even when any of the functions is set to [ On ], if [ NIC ] is set to [ Off ], the machine does not enter
Power Off Mode.
Even when [
Network ] or [ USB Cable ] is set to [ Off ], if the machine does not communicate with
the other devices, the machine will enter Power Off Mode.