Triumph Adler LP 4140, Инструкция по эксплуатации

Страница: 59 / 76

Troubleshooting
OPERATION GUIDE 4-13
RAM disk error ##
Press GO
Look at the error code given in place of
##
and refer to the corresponding
description given below.
01:
Format error. Try turning the power off and on again.
02:
RAM disk mode is
Off
. Turn RAM disk mode
On
.
04:
No disk space. Clean up files.
05:
Specified file is not on disk.
06:
No memory for use by disk system. Expand printer memory.
Virtual mailbox
full
The storage area for the VMB is full. Print out accumulated VMB data.
USB mem. removed
Press GO
The USB flash memory is accidentally removed from the printer. To ignore the
USB memory error, press
[GO] . The message display returns to
Ready
.
USB memory err05
Press GO
The designated file does not exist. Check the designated file name and existence
of the file in the USB memory.
Unknown toner
installed
The installed toner container is displayed if determined not to be an original
toner container by the self-diagnostic performed after power is switched
on.
If this message is displayed, the amount of toner remaining cannot be checked.
:Alarm buzzer sounds when an error occurs. Press [CANCEL] to stop the alarm buzzer.
Message Corrective Action
;Ò
;Ò
;Ò