Triumph Adler LP 4014, Инструкция по эксплуатации

Страница: 53 / 182

Printer Environment
1-41
3
Set the size of the RAM disk. Click RAM disk size . Set the size by
clicking the
▲
and
▼
buttons in the combo box on the right side of
the screen, or input the value directly into the combo box.
The maximum RAM disk value should be 9 MB less than the printer’s
total memory. The default RAM disk value is 7 MB (16 MB minus 9 MB).
When the total memory size is 21 MB or more (144 MB max.), the RAM
disk size on the Remote Operation Panel is factory-set to display 12 MB
regardless of the actual total memory, which can be set to the desired
RAM size (135 MB max) with the
▲
▲ ▲
▲
button.
4
After making settings, click the OK button to return to the start-up
screen.
5
Turn the printer’s power off and on again to make the new setting
effective.
Note
RAM disk size