Triumph Adler FAX 950 Скачать руководство пользователя страница 57

Страница: 57 / 155

5-3

6HFWLRQ

Replacing Consumables and Maintenance

Then, pull the toner cartridge release lever toward you once
again.
* MAKE SURE you pull the toner cartridge release lever

towards you until the arrow (

씰

) on the release lever is

aligned with the arrow (

씱

) on the toner cartridge as shown in

the illustration.

6. Pull the right side of the toner cartridge towards you slightly.

7. Remove the toner cartridge by moving it towards the right

side of the facsimile and place it in the toner cartridge cover.
* DO NOT turn the toner cartridge upside down as there is a

danger that the toner will spill.

8. Use the supplied seal to close the opening in the toner

disposal box that is attached to the toner cartridge.

10. Shake the new toner cartridge horizontally 10 times from

side to side.

11. First set the left side of the toner cartridge into the imaging

unit.
* Make sure the arrow (

씰

) on the toner cartridge release

lever is aligned with the arrow (

씱

) on the toner cartridge

as shown in the illustration.

12. Next set the right side of the toner cartridge into the

imaging unit.

CAUTION

Do not incinerate toner and toner containers.
Dangerous sparks may cause burn.

9. Close the toner cartridge cover and remove it from the

facsimile.

Содержание FAX 950




























































































































































Результаты поиска

Содержание FAX 950

Отзывы:

Похожие инструкции для FAX 950

Бренды по названию

Популярные бренды

Triumph Adler FAX 950, Инструкция по эксплуатации

Результаты поиска

Содержание FAX 950

Отзывы:

Похожие инструкции для FAX 950

Бренды по названию

Популярные бренды