Triumph Adler DCC 6526L, Руководство пользователя

Страница: 348 / 526

Default Setting (System Menu)
8-103
8
6
Press the
OK
key. This displays the density
selection screen for the mode selected in step 5.
The screen shown is the one when [Manual] is
selected.
7
Press the  or  key to select the density from [-
3 Lighter] to [+3 Darker].
8
Press the
OK
key.
Completed.
is displayed and the
screen returns to the Adjust/Maint. menu.
AutoColorCorrect
This setting allows you to adjust the detection level used by the machine to determine whether the original is
color or black and white during Auto Color Mode. Setting a lower value will result in more originals being
identified as color, while a larger value will tend to increase the number of originals being identified as black and
white.
Use the procedure below to set the Auto Color Detection Level.
1
In the Sys. Menu/Count. menu, press the  or 
key to select [Adjust/Maint.].
2
Press the
OK
key. The Adjust/Maint. menu
appears.
3
Press the  or  key to select [AutoColorCorrect].
4
Press the
OK
key. AutoColorCorrect appears.
5
Press the  or  key to select a value from [5] to
[1].
6 Press the
OK
key.
Completed.
is displayed and the
screen returns to the Adjust/Maint. menu.
Manual:
a b
3
-1
*********************
5
+1
4
* 0 Normal
Sys. Menu/Count.:
a b
:
Document Box
;
Edit Destination
*********************
[ Exit ]
<
Adjust/Maint.
Adjust/Maint.:
a b
*********************
2
Send/Box Density
3
AutoColorCorrect
[ Exit ]
1
Copy Denst. Adj.
AutoColorCorrect:
a b
*********************
2
4
3
3
1
5